I made another travelers notebook (fauxdori).
I may have an obsession.
It’s just that I’m not 100% happy with my last one.

Using the adhesive spray to fuse the layers together seemed like an ok idea, but eventually it started to come apart. Last night was when I noticed it, so I immediately decided to do something about it. I was going to just stitch around the edge, but then I saw an old tote bag I no longer use and my wheels started turning.
A little over an hour later I had another notebook cover and extra tote bag fabric left over! 😆😆 (Don’t worry, I’ll still fix the other notebook.)

This one was made using fabric, interfacing and a small amount of faux leather. I edge stitched around the whole thing twice to keep it together and I put one row of stitching down the center. I was too sleepy to worry about using bias binding or stitching it with the right sides together and then turning it out. 😕

It has 2 pockets and a large pen loop that holds 2 pens. It has 4 elastics which I’m trying to stick to because I have a tendency to pack too much into the notebook. I used eyelets again for the holes which still don’t look right on the inside. I almost cut myself on the sharp edges. What am I doing wrong!?

I threaded some beads from an old bracelet onto the elastic closure and that’s that!
I’m pleased with the way it came out and love the print.

After seeing lots of people make fabric notebooks with unfinished edges to encourage fraying, I figured I’d try it out.

Who am I kidding?! Fraying would bug the heck outta me!! I’d just keep pruning it with my little scissors to get rid of the threads. 😕

So I probably used about a bottle of fray check on the edges.
No exaggeration. Next time I’ll just use the turning out method for cleaner edges.

Anyway, I’m happy.. er.. 😆

I’m still trying to find the best way to make a travelers notebook. I’m using faux leather because it’s so readily available as I have several old tote bags I can cut up to use.
Unfortunately its awful to stitch with, it stretches and tears very easily.

So this time around I fused the two salvaged tote bag pieces together using a spray adhesive. The bond seems pretty strong but there are a few spots where it looks like it’s coming away a bit. I’m sure a little crazy glue will fix that. I’m considering top stitching around the whole cover to secure the edge, but I’m worried it will give me grief as usual and come out looking messy.

The pen loop isn’t faring very well at all and after only one day it’s tearing at the stitch line. I may have to get a clip or stick-on pen loop. I have a clip which holds one pen, and they actually sell the same with 2 and 3 loops for pens in the same clip. Genius!

I added inner pockets to this one as well but won’t show them as it’s not very straight. The faux leather didn’t stretch as much as last time, but it still annoys me to look at it. 😕

I’ve heard good things about using heat ‘n bond for leather and fabric covers, but such a process would probably burn or melt the faux leather even with a protective barrier. (ask me how I know that) I’m going to order some anyway for when I stitch a fabric cover.

I used eyelets for the holes to thread the elastic through and love how neat it looks on the outside. The inside however is far from neat and I can’t seem to figure out how to prevent the jagged edges from happening.

I feel I’m a step closer to my perfect fauxdori/travelers notebook/“Zudori”; but I still have a lot of testing ahead of me. Which I’ll enjoy thoroughly. 😉

I haven’t been feeling well these last few days, so have only been doing things that require a short amount of “making” time. In other words, I made another notebook cover! Lol
Midori Travelers Notebooks have just consumed my life I swear. 😕

I bought some orange scrap leather on eBay so I could see what all the fuss was about in regards to having an “authentic” Midori. Well, as close to authentic as I could get without the hefty price tag.

Leather and I are just not friends. First off it was way too floppy, so I had to use lots of interfacing and some faux leather to add stiffness to it. After cutting and ironing and clipping it all together I was ready for stitching.
For whatever reason my machine just couldn’t seem to handle it. There were soooo many skipped stitches that I didn’t even see til I got to the end! This resulted in my going around the whole thing again and again, and attempting a different stitch pattern that might hopefully work, and having row upon row of weird uneven and over lapping stitches.

Come to find out after all my stress, the blasted needle was old and the cause of my problems. I had tried about a million times to stitch on the pen loop with no success. I gave up, but couldn’t get it out of my head. Something told me to try again and change my machine needle.
It stitched perfectly the very first time once I changed it. SIGH
I thought back to the many, many failed attempts, perforated leather and wasted time, and almost screamed. Then I decided to be happy instead since it had finally worked, and to use this as a learning experience.

Apparently I can sew with leather, I just needed a new sewing machine needle! 😊

I used thicker elastic cord this time which I really like. I also threaded the elastic differently, or in other words, the right way, and like this much better. Less stress and pulling on the spine of the cover.

Next time I need to find a slightly larger piece of leather so I can make deeper pockets, but this isn’t too bad.
I made the pen loop pretty big so it could hold 2 pens. I’m just sad it has so many holes in it from my many attempts to get it on there and that its a bit floppy. Next time I’ll stitch it on differently so the stitch line won’t be so noticeable.

I also added 2 bookmarks by just tying some thin cord through one of the holes at the top. I wasn’t sure I’d need one, so I made two instead. Hehe Just in case. 😉

I’m supposed to be making one of these faux-doris for a cousin of mine but wanted to make sure I got all the kinks out of my process first so I can be proud of what I produce for her. I think this totally justifies making…..however many I’ve made so far. Completely lost count. Lol

So I think I have the size and process down properly. Next time I’m hoping to have eyelet tools to use for making the holes, or at least a leather punch as using an awl looks a bit messy.

3-4 mm thick leather or fabric layers will work best in my opinion because who wants a floppy notebook cover?!
I am still hoping to come up with a way to make the elastic on the inside neater as I don’t like having the 3 knotted ends inside, but it’s just an aesthetic issue. They don’t get in the way at all and the Midori people get away with it perfectly fine.

Also I’m not sure how I feel about using leather, but I do feel that since this cows skin has been made into leather that it shouldn’t be wasted. Any scraps and bits that had to be thrown away made me feel so guilty though!
I feel a bit better knowing that this cover will last for a very long time and will be used, appreciated and loved.

Not sure if my next purchase will be faux or real leather, I’ll have to research more on what’s available. If I choose the real thing, I will continue to be extremely careful not to waste any.

Looks like there are a lot more of these fauxdoris in my future! Maybe I should call them a Zudori. Everyone else that’s making their own seem to be renaming them. Hehe

I’m obsessed. Sunday night and in the early hours of monday morning I made 2 more fauxdori travelers notebook covers.

Using an old tote bag made of the closest thing I could find to leather, I made an a5 size first. I decided it was way too big for me and since portability is important to me I knew I had to make another one.
My first cover is just a little short width wise than I’d like, so my best bet was to make another one, but a little wider.

I had planned on doing it monday morning before class or in the evening. I was in bed and couldn’t sleep as usual, so around 1:30 I raced downstairs to make the updated cover using the tote bag and was finished by 2:40. I’m getting faster!

I had a heck of a time dealing with that stupid stretchy red faux leather, so I probably could have finished sooner.

I don’t like the elastic knots on the inside, so decided to test out keeping the ends on the outside and securing them with a cord stop. I’m researching what else I can use to secure them as neatly as possible because I definitely like this better.

Next time I need to use a thicker fabric or use interfacing and 2 fabrics because I like a stiffer cover. I changed the pen loop into a pen pocket just for a change. Not sure which I prefer yet.

So I’m getting better with each one and already have my next one planned. Although I’ll need to buy fabric this time cause I don’t have any more bags to spare. Lol